VARILIGHT dimmer switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. Like all Varilight products these dimmers are designed to meet the latest European Safety Legislation.
It is important to select the correct dimmer switch for your application so please read the following information carefully.
The Varilight Wire Wound Low Voltage Dimmer is designed to be used in low-voltage circuits where wire-wound transformers are being used. Although wire-wound transformers are not ideally dimmed, Varilight have developed a dimmer that is capable of dimming such transformers..
The lights are dimmed by a rotary control knob and turned on and off by a push on/ off action. This dimmer is suitable for 1-way and 2-way circuits. .
Wire Wound Low Voltage Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can be achieved by adding an intermediate switch in to the circuit. When using a standard push on/off dimmer in a 2 or 3-way circuit the lights can only be dimmed from the location that the dimmer is situated in. Please note, if total dimming is preferred in all locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote range of dimmers.
All Low Voltage Dimmers, All Mains Voltage Dimmers, Dimmers For Wirewound Transformers, Leading Edge, Push-Push
Size - 1 Gang - Single
LightCircuit - 1 And/Or 2 Way
MainType - Dimmer
MaxWattage - 630w
MinWattage - 200w
PlateFinish - Classic Graphite 21